Hi Everyone,

I'm trying to flash the PSOC chip I bought from digikey and soldered onto the Re:Load Pro board (to make a long story short I broke the old one). I started with SWD using the PSOC programmer MiniProg3 and the bootloader from ..\reload-pro-master\firmware\Reload Pro.cydsn\Bootloader.hex which registered "successful". Then I tried to flash with instructions from "http://www.arachnidlabs.com/reload-pro/firmware/" which returns "timed out waiting for bootloader response"

Am I missing something to take a chip and load it with the latest Re:load Pro firmware?

Thanks,
Bob

You should be able to just flash the combined .hex from the firmware directory - that contains both bootloader and firmware image.

Thanks Nick! I managed to get the board to flash using the firmware walkthrough after several restarts and some kind of black magic I don't understand. Next time I have to do this I'll try the .hex in the firmware directory.

Thanks again,
Bob